ENGLISH
Install the panel using 2 hooks on the both sides of the indoor unit.
3
Detach the 4 corners of the panel. Use two grooves on the each corner of
the panels when pulling them out.
• Handle the corner with digital display gently, since there are electrical
cables connected to that corner.
4
Connect 3 cables between the indoor unit and the panel.
• Make sure you check the number of pins on the two white terminal
before connecting the cables.
6
Fix the bolt to the panel.
5-1 Fix 4 bolts to the panel temporarily.
5-2 Fix them tightly not to make a gap between the panel and the ceiling.
5
9
Groove
Hook
Panel
White(11 PIN)
White(13 PIN)
Blue
NASA_PANEL_IM_EN_03683A(1).indd 9 2013-01-14 오후 8:35:40
To Next Page
Loading...