Samsung 225MW - Page 11

Model
Connectin
g
the monitor
1.Connectin
g
to a Com
p
ute
r
1. Connect the power cord for your monitor to the POWER on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
2. Use appropriate connection for your computer.
2-1. Using the D-sub (Analog) connector on the video card.
Connect the signal cable to the
PC
port on the back of your monitor.
[PC]
2-2. Using the DVI (Digital) connector on the video card.
Connect the DVI cable to the
DVI-D
port on the back of your monitor.
[DVI-D]
3. Connect the
HDMI / PC / DVI-D AUDIO IN
port on the rear side of the monitor to the sound card of the
PC.
4. Turn on both your computer and the monitor.
2. Connecting to a Macintosh
SyncMaster 225MW