English - 10
Use to select TV or other external input sources such as DVD
players or Set-top/Cable boxes connected to the TV.
Use to select the input source of your choice.
To Select the Source
1
Press the MENU button.
Press the ▲ or ▼ button to select Input, then press
the ENTER button.
2
Press the ENTER button again to select Source
List. Press the ▲ or ▼ button to select signal
source, then press the ENTER button.
®
Available signal sources: TV,AV1,
Component1, Component2, PC, HDMI1,
HDMI2.
®
You can choose only those external devices
that are connected to the TV.
Your television has several setting options that allow you to
control the picture quality.
1
To select the desired picture mode, follow the
“Changing the Picture Standard” instructions number
1 to 2.
2
Press the ▲ or ▼ button to select Cell Light,
Contrast, Brightness, Sharpness, Color, or Tint,
then press the ENTER button.
● Cell Light: Selects the brightness of PDP Cell Light.
●
Contrast: Adjusts the contrast level of the picture.
●
Brightness: Adjusts the brightness level of the
picture.
●
Sharpness: Adjusts the edge definition of the
picture.
●
Color: Adjusts color saturation of the picture.
●
Tint(G/R): Adjusts the color tint of the picture by
compensating the red and green color.
Source List : TV
►
Edit Name
►
InputT V
Enter
Move
Return
TV
AV1 :
- - - -
Component1 :
- - - -
Component2 :
- - - -
PC :
- - - -
HDMI1 :
- - - -
HDMI2 :
- - - -
Source ListT V
Enter
Move
Return
You can select the type of picture which best corresponds to
your viewing requirements.
1
Press the MENU button to display the menu.
Press the ENTER button to select Picture.
2
Press the ENTER button to select Mode.
Press the ▲ or ▼ button to select Dynamic,
Standard, or Movie.
Press the ENTER button.
●
Dynamic: Select the picture for high-definition in
a bright room.
●
Standard
: Select the picture for the optimum
display in a normal environment.
●
Movie: Select the picture for viewing movies in a
dark room.
Picture Control
Changing the Picture Standard
Customizing the Picture Settings
3
Press the ◄ or ► button to decrease or increase the
value of a particular item. Press the ENTER button.
Press the EXIT button to exit.
®
When you make changes to Cell Light, Contrast,
Brightness, Sharpness, Color, or Tint(G/R) the
OSD will be adjusted accordingly.
®
When in PC mode, Tint(G/R), Sharpness and
Color are not available.
®
Each adjusted setting will be stored separately
according to its input mode.
Contrast 100
Move Adjust
Return
Cell Light 10
Move Adjust
Return
Mode :
Cell Light 7
Contrast 95
Brightness 45
Sharpness 50
Color 50
Tint(G/R) G 50 R 50
▼
More
PictureT V
Enter
Move
Return
Dynamic
Standard
Movie
Mode : Standard
►
Cell Light 7
Contrast 95
Brightness 45
Sharpness 50
Color 50
Tint(G/R) G 50 R 50
▼
More
PictureT V
Enter
Move
Return
To Next Page
Loading...
