Samsung 6 series - Page 87

English - 85
Manual Network Setup
To connect the TV to a LAN using a static IP address, you must set up the Internet Protocol (IP).
Please check if a LAN cable is connected rst. (Refer to page 84)
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Network Setup”, then press the
ENTER button.
3. Press the ENTER button to select “Internet Protocol Setup”.
4. Press the ▲ or ▼ button to select “Manual Setup”, then press the
ENTER button.
5. Press the ▲, ▼, ◄ or ► button to move to an item, and press the numeric
button to congure the selected item. Press the ENTER button.
Select “Network Test” to check the network connectivity.
(Refer to page 86)
Press the EXIT button to exit.
➣
➣
Setup
Language : English
Time
NetworkSetup  ►
V-Chip
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
SW Upgrade
Network Setup
Internet Protocol Setup : Auto Setup
Network Test
EnterMove
Return
Auto Setup
Manual Setup
Network Setup
Internet Protocol Setup : Manual Setup
Network Test
IP Address :
0 0 0 0
Subnet :
0 0 0 0
Gateway :
0 0 0 0
DNS Server :
0 0 0 0
Return
0~9
Number
EnterMove
BN68-01429C-Eng.indb 85 2008-02-26 ¿ÀÈÄ 5:14:40