Samsung AC052FBMDEH/EU - Page 47

4-7 Samsung Electronics
tPress the button anytime during setup to exit without setting.
tSetting an indoor unit DIP option code is available only with a master wired remote controller.
tSetting an indoor unit DIP option code is available when there is one on one connection between a
wired remote controller and an indoor unit.
tIndoor unit DIP option code will not be applied if you don’t press the
button.
4
Press the buttons and the button to set the
Indoor unit DIP option code.
5
Press the button.
Wired remote controller sends data to an indoor unit.
6
Press the button to exit.
You will move to the menu selection display.
Option No. : 02XXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation PAGE MODE
RESERVED
Use of external
temperature
sensor
Use of central
control
RESERVED
Indication
and Details
Indication Details Indication Details Indication Details Indication Details
02
0 Disuse 0 Disuse
1 Use 1 Use
Option SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
Explanation PAGE Use of drain pump HOT COIL
RESERVED RESERVED
Master / Slave
Indication
and Details
Indication Details Indication Details Indication Details Indication Details
1
0 Disuse 0 Disuse 0 slave
1 Use 1 Use 1 master
2
Use +
3minute
delay
-- - -
Option SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
Explanation PAGE
Use of external
control
Setting the output of
external control
RESERVED
Buzzer control
Number of hours using
lter
Indication
and Details
Indication Details Indication Details Indication Details Indication Details Indication Details
2
0
Disuse
0
Thermo
on
0
Use of
buzzer
2 1000 Hour
1
ON/OFF
Control
1
Operation
on
1
Non use
of buzzer
6 2000 Hour
2
OFF
Control
Option SEG19 SEG20 SEG21 - - - -
Explanation PAGE
Individual control
of a remote
controller
RESERVED
----
Indication
and Details
Indication Details Indication Details - - - -
3
0 or 1
Indoor 1
----
2
Indoor 2
3
Indoor 3
4
Indoor 4