Samsung AC052HBLDKH - Page 6

6
Thickness: more than 10mm
◆
Insulate the end of the pipe and some curved area by using separate insulator.
◆
Insulate the discharge and suction part at the same time when you insulate connection duct.
A C
B
D
Front
Back
Indoor Unit A B C D Front/Back
AC026HBLDKH
AC035HBLDKH
700x600x199 700x199 700x199
600x199 600x199
Insulate the front and back side
in proper size at the same time
when insulating the suction
duct and discharge duct.
AC052HBLDKH
AC071HBLDKH
1100x450x200 1100x200 1100x200
450x200 450x200
AC035HBMDKH
AC052HBMDKH
AC060HBMDKH
AC071HBMDKH
AC052HBMPKH
850X700X250 850X250 850X250 700x250 700x250
AC090HBMDKH
AC100HBMDKH
AC071HBMPKH
1200x700x250 1200x250 1200x250 700x250 700x250
AC120HBMDKH
AC140HBMDKH
AC090HBMPKH
AC100HBMPKH
AC120HBMPKH
AC140HBMPKH
1300x700x300 1300x300 1300x300 700x300 700x300
Insulation Guide
Deciding on where to install the indoor unit