5
Installation Procedure
English
Installation Procedure
Step 1 Checking and preparing
accessories
The following accessories are supplied with the indoor
unit. The type and quantity may differ, depending on the
specifications.
1 way Cassette
Pattern sheet A (1)
Pattern sheet B (1)
Insulation pipe (2)
Flexible hose (1) Insulation drain (1)
Rubber Installation manual (1)
Cable-tie (3) Installation gauge (1)
User manual (1)
4 way Cassette
Pattern sheet (1) Drain hose (1)
Insultaion pipe
(Liquid side1, gas side1)
Insultaion drain hose (1)
Installation manual (1) User manual (1)
Cable-tie (6) Clamp (1)
Step 2 Choosing the installation
location
Installation location requirements
ŷ There must be no obstacles near the air inlet and
outlet.
ŷ Install the indoor unit on a ceiling that can support its
weight.
ŷ Maintain sufficient clearance around the indoor unit.
ŷ Before installing the indoor unit, be sure to check
whether the chosen location is well-drained.
ŷ The indoor unit must be installed such that it is
beyond public access and is not touchable by users.
jhj|GX[l|ptlUGGG\ YWX]TXXTWYGGG㝘䟸GZaY[a\W
To Next Page
Loading...
