Disassembly and Reassembly
3-10
No. Parts Procedure
Remark
4
Evaporator
1) Remove the screws which is fixed to Indoor
Unit and separate the Evaporator fixing
bracket. (Use +Screw Driver)
2) Remove screws which is fixed to Indoor Unit
and pull the hook and then separate the Drain
Cover. (Use +Screw Driver)
When assemble, be careful with the
interference structure of piping
projecting part.
3) Separate the Evaporator from the Indoor Unit.
If you remove the Evaporator withbare hands,
it may injure your hands, gloves must be worn.
To Next Page
Loading...