Disassembly and Reassembly
3-12
No. Parts Procedure Remark
4
Outdoor Unit Guard
1) Pull out the sensor from the Outdoor Unit
Guard and separate it.
2) Remove the 4 screws which is fixed to
Outdoor Unit Guard and separate it. (Use +
Screw Driver)
5
Cabinet Rear RH
1) Pull out the sensor from the Cabinet Rear RH
and separate it.
2) Remove the 4 screws which is fixed to each
side of Cabinet Rear RH and separate it. (Use +
Screw Driver)
To Next Page
Loading...