Samsung AC140MXAD*H - Page 50

Troubleshooting
4-10
The procedure of setting option(Cont.)
Steps Remote control display
13 Set the SEG16 and SEG17 values:
a
Set the SEG16 value by rotating the Wheel counterclockwise until
the value you want to set appears on the remote control display.
b Set the SEG17 value by rotating the Wheel clockwise until the value
you want to set appears on the remote control display.
When you rotate the Wheel, values appear in the following order:
SEG 16
SEG 17
14 Press the (Mode) button. Dry and Off appear on the remote control display.
15 Set the SEG18 and SEG20 values:
a
Set the SEG18 value by rotating the Wheel counterclockwise until
the value you want to set appears on the remote control display.
b Set the SEG20 value by rotating the Wheel clockwise until the value
you want to set appears on the remote control display.
When you rotate the Wheel, values appear in the following order:
SEG 18
SEG 20
16 Press the (Mode) button. Fan and Off appear on the remote control display.
17 Set the SEG21 and SEG22 values:
a
Set the SEG21 value by rotating the Wheel counterclockwise until
the value you want to set appears on the remote control display.
b Set the SEG22 value by rotating the Wheel clockwise until the value
you want to set appears on the remote control display.
When you rotate the Wheel, values appear in the following order:
SEG 21
SEG 22
18 Press the (Mode) button. Heat and Off appear on the remote control display.