Disassembly and Reassembly
3-54 Samsung Electronics
No Parts Procedure Remark
3 Evaporator ▶ The Evaporator should be
disassembled after disassembling the
Cover Control 1-3) and the Drain Pan
2-1), 2-2), 2-3).
1) Disassemble the Cover Pipe that fixes
the high/low pressure Pipe.
- Unscrew 2 screws
2) Disassemble the refrigerant
temperature sensor, Inlet air
temperature sensor, and EEV wire that
connected to the inside of PCB.
3) Disassemble the Support Evap. LF that
fixes the Evaporator.
- Unscrew 2 screws
4) Disassemble the Support Evap RH.
- Unscrew 2 screws
To Next Page
Loading...