Disassembly and Reassembly
3-12 Samsung Electronics
No Parts Procedure Remark
7 Fan & Motor 1) Turn the hexangular nut attached to
the top of the Fan counterclockwise
to remove it. Take the Fan out of the
Motor.
2) Turn the three hexangular nuts on the
Motor counterclockwise to remove the
nuts. Take the Motor Wires attached
to these three locations out with your
hands prior to removing the Motor.
8 Evaporator 1) Remove the screws of the 2 Steel
Holder Evaps that are used to fix the
Heat Exchanger, and then remove it.
(Use +Screw Driver)
2) Remove the 2 fixing screws of the
Partition Evap at the Heat Exchanger’s
In/Out Pipe.
(Use +Screw Driver)
To Next Page
Loading...