Samsung Electronics 3-25
No. Parts Procedure Remark
12 PLATE COOLING 1) Purge the Coolant first.
2) Separate 2 weld points on plate cooling by
using a welder.
Warning : When removing the
compressor,Heat Exchanger,
and Pipe, purge the Coolant
inside the Compressor com-
pletely and remove the pipe
with a welding flame.
13 TUBE DISCHARGE 1) Separate 2 weld points by using
a welder. (Tube discharge to oil
separator&compressor)
To Next Page
Loading...
