Samsung AE044MXTPEH - Hydro Unit Troubleshooting

Samsung Electronics
69
4-4-1 EEPROM error
Indoor unit display
×(Operation) ◑(Timer) ◑(Fan) ◑(Filter) ×(Defrost)
•PCBreplacementduetodefectiveEEPROM
Criteria
Cause of problem
• Communication failure between EEPROM and MICOM
Outdoor unit display
1. How to check
Yes
Are there any problems
such as short or dewetting between
EEPROM PIN?
If you restart after reentering
model options and power reset, does the
error occur again?
Replace PCB
Yes
No
Normal operation
No
Check the location of EEPROM by
referring to the schematic diagram
Replace PCB
4-4 Hydro Unit
EEPROM SUB PBA