Samsung AEGIS WF8500NHW - Page 19

20 _ Removal and Reassembly
Part Figure Description
SENSOR PRESSURE
1. ConnecttheWater-Hosetothemainbody
ofthePressure-Switch.
2. FixtheHose-Clamper.
3. PlacethePressure-SwitchintotheBracket
HoleholdingthemainbodyofthePressure-
Switch.
4. ToseparatethePressure-Switch,pullthe
Pressure-Switchforwardswhilepushingthe
markedpartwithyournger.
WF-M592NMH-YLP.indb 20 2010-2-22 13:29:46