To Next PageTo Next Page
Need help?Do you have a question about the Samsung AEX160EDEHA and is the answer not in the manual?
General| Power Supply | 220-240V, 50Hz |
|---|---|
| Air Flow (High) | 12.5 m³/min |
| Cooling Capacity | 16000 BTU/hr |
| Operating Temperature (Cooling) | 18°C to 43°C |
| Operating Temperature (Heating) | 24°C |
Guidelines for using standard parts and ensuring firm connections during repair.
Measures to prevent damage from static electricity and PL during repair.
Essential safety rules for handling electrical hazards, wiring, and refrigerants.
Safety measures for disposal and handling of systems containing refrigerants.
Safety guidelines for brazing, including environment clearing and gas usage.
Procedures for safely adding refrigerant, including quantity and container handling.
Detailed specifications for outdoor units, including capacity, power, and noise levels.
Technical details and specifications for optional accessories and items.
List of essential hand tools required for the disassembly and reassembly process.
Step-by-step guide for disassembling and reassembling the hydro unit.
Detailed instructions for safely disassembling and reassembling the outdoor unit.
Guidance on interpreting error codes and troubleshooting issues via the wired remote controller.
Diagnostic procedures based on observed symptoms and error codes.
Specific troubleshooting steps for errors related to the hydro unit.
Essential checks to perform before initiating detailed diagnostics or troubleshooting.
Troubleshooting steps for communication errors after tracking operations.
Diagnosing and resolving communication timeout errors between MAIN and INV. PBA.
Troubleshooting temperature sensor errors identified by specific error codes.
Steps for diagnosing and fixing fan errors indicated by error codes E458 and E475.
Troubleshooting compressor starting or wire missing errors (E461, E467).
Diagnosing and resolving current trip or over-current errors (E462, E463).
Troubleshooting IPM (IGBT module) over current errors indicated by E464.
Steps to resolve DC-link voltage under/over errors (E466).
Troubleshooting procedures for gas leak errors (E554).
Troubleshooting for miscellaneous error codes not covered in previous sections.
Resolving issues where the unit operates in the wrong mode (heating/cooling).
Initial troubleshooting steps when the outdoor unit fails to power on.
Diagnosing and resolving errors related to the outdoor unit's power supply.
Visual representation and labeling of components on the hydro unit's PCB.
Visual representation and labeling of components on the outdoor unit's PCBs.
Electrical schematic showing the wiring connections for the hydro unit.
Electrical schematic detailing the wiring connections for the outdoor unit.
Functional schematic illustrating the electronic and operational flow of the hydro unit.
Functional schematic illustrating the electronic and operational flow of the outdoor unit.
An index to understand model naming conventions for outdoor units.
