Samsung AM022TNADKH/EU - Page 137

Disassembly and Reassembly
Samsung Electronics 137
No Parts Procedure Remark
1 PANEL And FILTER
12) Remove the 4 screws fixed in STEP MOTOR
and then remove the MOTOR.
(Use +Screw Driver)
13) Remove the 4 HINGE and then separate the
BLADE H.
14) Separate the SENSOR HUMIDITY.
15) Remove the 4 screws fixed in GUIDE AIR and
then remove the GUIDE AIR.
(Use +Screw Driver)
16) Separate the PLATE