Disassembly and Reassembly
154 Samsung Electronics
No Parts Procedure Remark
7
Heat Exchanger
4)
Separate the Heat Exchanger from the indoor
unit.
5) Separate the EXPANSION COIL from the EEV
BODY.
(When servicing the EEV)
8
DRAIN PUMP
(Continues)
1) Remove the 3 screws fixed in COVER FAN
MOTOR. (Use +Screw Driver)
2) Remove the screw fixed in HOLDER FAN.
(Use +Screw Driver)
If the reassembly, end surface of HOLDER
FAN and surface of ASSY CROSS FAN_L
should be consistent.
To Next Page
Loading...
