Disassembly and Reassembly
Samsung Electronics 169
No Parts Procedure Remark
3 Evap
6) Disassemble The Evap.
- Unscrew 2 screws.
① Moving the Evap 2~5cm to pipe direction.
②
Holding the pipe side and then rotating the
opposite side.
③ Moving the Evap in the direction of the
arrow 3.
No Parts Procedure Remark
6) Disassemble The Evap.
- Unscrew 2 screws
① Moving the Evap 2~5cm to pipe direction
② Holding the pipe side and then rotating the
opposite side
③ Moving the Evap in the direction of the
arrow 3
①
②
③
To Next Page
Loading...
