Disassembly and Reassembly
Samsung Electronics 255
No Parts Procedure Remark
13 Ass'y Evap Parts
4) Separate the 2 thermal sensors attached
to Ass'y Evap.
5) Unscrew 2 screws from the Support
Evap L.
6) Unscrew 2 screws from the Support
Evap R.
7) Pull the Ass'y Evap to the direction
indicated by the arrow to separate it from
the fixed part.
8) Hold the end part of the Ass'y Evap and
pull to the direction indicated by the arrow
to separate it from the product.
To Next Page
Loading...
