Disassembly and Reassembly
Samsung Electronics 261
No Parts Procedure Remark
1
Front Grille 7) Unlock 3 hooks to fix Panel Front and Back-
Body.
2
Control-In
(Main PCB)
1) Take all the connector of PCB upper side
out. (Inclusion Power Cord)
2) Detach the outdoor unit connection wire
from the Terminal Block.
3) Loosen 4 fixing screws(CCW) of Ass'y
Control-In. (Use +Screw Driver.)
You can disassembly Ass'y Control In
without evaporator disassembled.
3
Tray Drain
1) Pull Tray Drain out from the Back Body.
To Next Page
Loading...
