Disassembly and Reassembly
268 Samsung Electronics
No Parts Procedure Remark
2 TRAY DRAIN
1)
Loosen stepping motor wire and detach
the hook of main frame.
2)
To detach TRAY-DRAIN from the main
frame, pull the bottom of the TRAY-DRAIN
towards you.
3)
To detach TRAY-DRAIN from the main
frame , pull the bottom of the TRAY-
DRAIN towards you.
3 CONTROL IN
(Continues)
1)
Unfasten the earth screw.(use +
ScrewDriver)
2)
Detach the temperature sensor and
Humidity sensor.
3)
Detach the temperature sensor.
To Next Page
Loading...
