Disassembly and Reassembly
344 Samsung Electronics
No Parts Procedure Remark
8 ASS'Y MOTOR
BLOWER
1) Unscrew 5 ASS'Y DUCT CASE screws. (using
+ SCREW DRIVER)
2) Loosen 3 MOTOR nuts and unscrew a
ground screw. (using MONKEY SPANNER)
(Separates a connected connector before
disassembling motor.
Disassembly directionDisassembly direction
9 COVER TOP 1 UNSCREW 3 COVER TOP SCREWS. USING
+SCREW DRIVER
SCREW : TH 2TYPE M4, L10, BLK
2 SEPARATES COVER TOP BY LIFTING COVER
TOP'S BACK PARTS.
Disassembly directionDisassembly direction
To Next Page
Loading...
