Samsung AM036NN1DKH/EU - Page 362

Disassembly and Reassembly
362 Samsung Electronics
No Parts Procedure Remark
3 Motor & Blower 1) Disconnect the motor wire
2) Disassemble the 1 Bracket Motor and
2 Holder Motors
- Unscrew 2 screws
3) After disassembling the Motor and Blower
for the set, disassemble the Blower by use
of 3mm wrench.
4) Disassemble the 3 Case Blower Top.
- Unscrew 6 screws
5) Disassemble the Bracket Motor.
- Unscrew 6 screws
6) Disassemble the 3 Case Blower Out.
- Unscrew 6 screws