Disassembly and Reassembly
210 Samsung Electronics
No Parts Procedure Remark
8)
Loosen the COMM wire
connector(CN303).
When you take off the PBA, don’t
touch the components. Please hold
the PBA both side.
9)
Loosen the Motor connector(CN701).
When you separate the connector,
pull pressing the locking button.
10) Take off the main PBA from the ASS’Y
Control in.
When you take off the PBA, don’t
touch the components. Please hold
the PBA both side.
5 EVAPORATOR
1)
Unfasten the screw at the right side.
(use + ScrewDriver)
To Next Page
Loading...