Samsung CLP-510 Series - Changing the Status Monitor Program Setting; Opening the Troubleshooting Guide

A DVANCED P RINTING
5.18
4 Select Status Monitor and then click Next .
5 When the installation is completed, click Finish .
N OTE : If you want to remove the Status Monitor, refer to the
Setup Guide supplied with your printer.
Opening the Troubleshooting Guide
Double click the Status Monitor icon on the Windows task bar.
Or, from the
Start menu, select Programs ➔ Samsung CLP-
510 Series
➔ Troubleshooting guide .
Changing the Status Monitor Program
Setting
Select the Status Monitor icon on the Windows task bar and
right-click on the Status Monitor icon. Select
Option .
The following window opens:
•
Display when job is finished for network printer shows
the Status Monitor balloon when your job is complete.
Double click this icon.