Samsung CLP-600 Series - Motor Test; How to Operate

Alignment and Adjustmens
Samsung Electronics
Service Manual
6-23
6.6.2.1 Motor Test
This function allows the operation of the various motors to be checked.
<How to operate>
a) Press the "<" or ">" key until "Motor Test" is displayed.
b) Press the "Enter" key to select this function.
c) Press the "<" or ">" key until you see the name of the motor you wish to test.
d) Press the "Enter" key to run the test. The test is stopped by pressing the "Upper Level" key.
e) Pressing the "Upper Level" key when the test is already stopped will return to step 'c' above.
f) Pressing the "Upper Level" key again will return to the EDC main menu.