Samsung CLP-600 Series - Main PBA

Samsung Electronics
Service Manual
Disassembly and Reassembly
5-32
>> Before disassembling it :
* Remove the Rear Cover (Refer to 5.4.3)
* Remove the Left Cover (Refer to 5.4.5)
1. Remove the five screws from the Bracket Conn and remove it, as shown below.
2. Unplug the all connectors and then remove the four screws from the Main PBA.
5.4.11 Main PBA
Screw
Screw
Screw
Screw
Screw
Bracket-Conn
Screw
Screw
Screw
Screw
Main PBA(with PCB Sub-PCI NPC)