Samsung CLP-770ND - Fuser Control Board Removal; HVPS Sub Board (AC Board) Removal

Disassembly and Reassembly
3-10
Samsung Electronics
3.3.7 Fuser Control Board
- Before disassembling the Fuser control board, remove the cover unit.
1. Unplug the harness from the Fuser control board.
2. Remove 4 screws and release the Fuser control board.
3.3.8 HVPS sub board(AC Board)
- Before disassembling the AC board, remove the Main PBA. (refer to 3.3.5 Main PBA.)
1. Remove the 4 screws. 2. Remove the SMPS board after removing the 4
screws.