Adjustment and Troubleshooting
Service Manual
4-1
Samsung Electronics
4
4
4. Adjustment and Troubleshooting
This chapter describes some of the main service procedures including:
Using the Tech mode; Clearing paper jam and test patterns.
Tips for avoiding paper jams, Clearing paper jams.
Solving other problems.
4.1 Alignment and Adjustments
4.1.1 Control Panel
1 Display: Shows the current status and prompts
during an operation.
2 Toner col ors: The toner colors shown below the
LCD display co-works with display messages.
3 Status: Shows the status of your machine.
4 Menu: Enters Menu mode and scrolls through the
available menus.
5 Scroll buttons: Scroll through the options
available in the selected menu, and increase or
decrease values.
6 OK: Confirms the selection on the screen.
7 Back: Sends you back to the upper menu level.
8 ID copy: You can copy both sides of the ID Card
like a driver's license to a single side of paper.
9 USB Print: Allows you to directly print files stored
on a USB flash drive when it is inserted into the
USB port in the front of your machine.
10 Scan to: Allows you to access a list of the PC soft-
ware programs that an image can be scanned to.
11 Black : Starts a job in Black and White mode.
12 Color: Starts a job in Color mode.
13 Stop/Clear: Stops an operation at any time. In
Standby mode, clears/cancels the copy options,
such as the darkness, the document type setting,
the copy size, and the number of copies.
To Next Page
Loading...
