Samsung CLX-3185 - Page 40

Product spec and feature
Service Manual
2-31
Samsung Electronics
2.2.2.5 HVPS(High Voltage Power Supply) PBA
The HVPS creates the high voltages for T1(+), T2(+,-), Charger(-), DEV, and SUPPLY and then, supplies
these voltages to the Developer part for making best condition to print. The HVPS part takes the 24V and
outputs the high voltages and then, the high voltages are supplied to the Toner, OPC Cartridge, and Transfer
Belt and Roller.
Main
PBA
Regi
WASTE
FAN
Exit Sensor
T2
-1300V 15%
Charger
-1000V 3%
T1
+1000V 3%
BIAS AC
+141V 3%
BIAS DC
-295V 3%
SUPPLY DC
-595V 3%
Main
PBA
Regi
WASTE
FAN
Exit Sensor
T2
-1300V 15%
Charger
-1000V 3%
T1
+1000V 3%
BIAS AC
+141V 3%
BIAS DC
-295V 3%
SUPPLY DC
-595V 3%