3.4 Disassembly Procedure
The description of disassembly and reassembly in this manual is listed according to the disassembly
procedures. If you nd the certain unit or Ass’y, please consult the name of unit under the picture.
3.4.1 Cover
Before disassembling,
- Remove the CMYK toner, Toner waste tank, and Drum unit.
1. Remove one screw from the rear of machine.
2. Remove the right side cover by unhooking after
open the front cover.
3. Remove the left side cover. And open and
remove the rear cover.
4. Open the front cover. Unplug the connector after
removing the connector cover. And then remove
the front cover.
To Next Page
Loading...
