Control panel overview
28
1. Introduction
6 Arrows Scrolls through the options available in the selected menu and increases or decreases values.
7
Menu
Opens Menu mode and scrolls through the available menus (see "Menu overview" on page 34).
8 OK Confirms the selection on the screen.
9 Numeric keypad Dials a number or enters alphanumeric characters (see "Keypad letters and numbers" on page 222).
10 Address Book Allows you to store frequently used fax numbers or search for stored fax numbers (see "Setting up the fax address book" on page 223).
11
Redial/Pause
Redials the recently sent fax number or received caller ID in ready mode, or inserts a pause(-) into a fax number in edit mode (see
"Redialing the fax number" on page 248).
12
Stop/Clear
Stops an operations at any time.
13
Power/
Wakeup
Turns the power on or off, or wakes up the machine from the power save mode. If you need to turn the machine off, press this button for
more than three seconds when the machine is in ready mode.
14
Start
Starts a job.
15
On Hook Dial
When you press this button, you can hear a dial tone. Then enter a fax number. It is similar to making a call using speaker phone (see
"Receiving manually in Tel mode" on page 254).
16
Back
Sends you back to the upper menu level.
17
Scan
Switches to Scan mode.
18 Status LED Indicates the status of your machine (see "Understanding the status LED" on page 107).
To Next Page
Loading...
