Basic copying
63
2. Menu Overview and Basic Setup
• Photo: Use when the originals are photographs.
• Magazine: Use when the originals are magazine.
4
Press (Stop/Clear) to return to ready mode.
Reduced or enlarged copy
You can reduce or enlarge the size of a copied image from 25% to 400% from the
document feeder or scanner glass.
• This feature may not be available depending on model or optional goods
(see "Variety feature" on page 10).
• If the machine set to Eco mode, reduce and enlarge features are not
available.
To select from the predefined copy sizes
1
CLX-330x series/CLX-330xW series: Make sure that the Scan to button’s
LED is off.
CLX-330xFN series/CLX-330xFW series: Select (copy) on the control
panel.
2
Select (Menu) > Copy Feature > Reduce/Enlarge on the control
panel.
3
Select the option you want and press OK.
4
Press (Stop/Clear) to return to ready mode.
To scale the copy by directly entering the scale rate
1
CLX-330x series/CLX-330xW series: Make sure that the Scan to button’s
LED is off.
CLX-330xFN series/CLX-330xFW series: Select (copy) on the control
panel.
2
Select (Menu) > Copy Feature > Reduce/Enlarge > Custom on the
control panel.
3
Enter the copy size you want using the numeric keypad.
4
Press OK to save the selection.
5
Press (Stop/Clear) to return to ready mode.
When you make a reduced copy, black lines may appear at the bottom of
your copy.