Alignment & Troubleshooting
Service Manual
4-42
Samsung Electronics
● Code
03-000
● Error message
Motor error
Error: #03-000
Turn off then on
● Symptom
Motor Signal is abnormal.
● Possible Cause
1. Harness is defective, Connector is not connected properly.
2. Main BLDC Motor is defective.
3. Main Board is defective.
● Troubleshooting method
1. Replace Harness if defective.
2. Replace the Main BLDC Motor if defective.
3. Replace the Main Board if defective.
To Next Page
Loading...
