Samsung CLX-6220FX - Page 152

Alignment & Troubleshooting
Service Manual
4-81
Samsung Electronics
2) Scan Lock Error
Note: Before troubleshooting, ensure the customer has released the scan lock, see page 4-51.
Description : CCDM does not move and displayed ‘Scanner Lock’ on the LCD Panel.
1. Check the CCD Home Sensor.
Replace the CCDM Home Sensor.
Replace the Scan Joint Board.
2. Check the Motor Driver(A3983)
on the Scan Joint Board.
Replace the SMPS.
3. Check the 24V Fuse on the SMPS.
Connect the CCDM with the belt
correctly.
4. Check the connection
of CCDM with the belt.