Samsung CLX-8380ND - Removing Printer Software; Installing Mono Printer Driver

Installing Printer Software in Windows
12
Removing Printer Software
1 Start Windows.
2 From the Start menu select Programs or All Programs
→ your printer driver name → Maintenance .
3 Select Remove and click Next .
You will see a component list so that you can remove any
item individually.
4 Select the components you want to remove and then click
Next .
5 When your computer asks you to confirm your selection,
click
Yes .
The selected driver and all of its components are removed
from your computer.
After the software is removed, click
Finish .
Installing mono printer driver
This printer provides you the printer drivers with a mono driver
so you can use your printer as a monochrome printer. You must
install the mono driver on your computer. Following steps guide
you through the step by step installation process.
1 Make sure that the printer is connected to your computer
and powered on. Or your computer and printer are
connected to the network.
2 Insert the supplied CD-ROM into your CD-ROM drive. The
CD-ROM should automatically run, and an installation
window appears.
3 Click Cancel.
If the confirmation window appears, click Finish.
4 Click Start → Printers and Faxes .
5 Select Add Printer .
6 When Add Printer Wizard appears, click Next .
7 Select Local printer attached to this computer , and
Automatically detect and install my Plug and Play
printer , then click Next . Go to step 13.
If your computer does not find the printer, then follow the
next step.
8 Select Next in the Select a Printer Port window.
9 In the Select a Printer Port window, select Have Disk... .
10 Click Browse to find a mono driver for your printer.
ex) Windows XP 32 bit
Select CD-ROM drive
→ Printer → PC_MONO →
WINXP_2000_VISTA-32
11 Select ***.inf file and click Open .
12 Click OK in the Install From Disk window.
13 Select a mono driver in the Printers field, and click Next .