14.5 <
Troubleshooting>
In the optional tray
Note
This part explains the method of removing the jammed paper in
the optional tray 2. Please refer to the next method for other
optional trays, since the method is same as the tray 2
1 O
pen the outer cover in tray 2.
2 Ope
n the inner cover of tray 2.
3 Pu
ll the jammed paper out in the direction shown. To avoid tearing
the paper, pull it out gently and slowly.
If the paper does not move when you pull, or if you do not see any
paper in this area, stop and go to step 4.
4 Lift the front part of the tray slightly up to release the tray from the
machine.
If the paper does not move when you pu
ll, or if you do not see the
paper in this area, stop and go to step 3.
5 Remove the p
aper in the direction shown. To avoid tearing the
paper, pull it out gently and slowly.
6 In
sert the paper tray and close the two covers.
To Next Page
Loading...
