Samsung CLX-8540ND - 1-Bin Finisher

Maintenance and Disassembly
Service Manual
3-65
Samsung Electronics
3.2.2.20 1-bin Finisher
1. Unplug the connector from the SET.
2. Pull the Finisher carefully from the SET with
pushing the latch.
3. Push the hook and release the tray stacker.
4. Release the cover scan dummy [A] after
removing 1 screw.
5. Take out the staple cartridge [B].
And remove 3 screws.
6. Remove 1 screw.
[A][A]
[B][B]
[A][A]
[B][B]
[A][A]
[B][B]
[A][A]
[B][B]
[A][A]
[B][B]
[A][A]
[B][B]