EasyManua.ls Logo

Samsung CLX-8540ND - Page 230

Samsung CLX-8540ND
403 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4-68
Troubleshooting
4-145
802.1x authentication failed. Please Contact the System
Administrator.
13-007
4-144
DHCP error. Reconfigure BOOTP or static IP
13-006
4-144
BOOTP error. Reconfigure DHCP or static IP
13-004
4-138Communication problem occurred with tray 2(HCF) 10-008
4-138Communication problem occurred with tray 3 10-009
4-137System error: #10-004. Please turn off then on 10-004
4-136Hard disk drive error : #10-003. Please turn off then on10-003
4-144
BOOTP error. Switching to Auto IP
13-003
4-143This IP address conflicts with that of other system. Check it13-000
4-142Load tray 3 with [Letter], [Plain] paper12-002
4-141
Load tray 2 with [Letter], [Plain] paper
Load HCF with [Letter], [Plain] paper
12-001
4-141Load tray 1 with [Letter], [Plain] paper12-000
4-140Scanner locking switch is locked or another problem occurred11-003
4-138Communication problem occurred with scanner unit10-006
4-135Fax unit error: #10-002. Please turn off then on10-002
4-144
DHCP error. Switching to Auto IP
13-005
4-134Memory failure: #10-001. Please turn off then on10-001
4-130Original paper jam inside of scanner duplex path 08-010
4-132Top door of scanner is open 08-008
4-133Original paper is too long for scanner. Check size08-007
4-132Original paper jam inside of scanner 08-006
4-132Original paper jam in front of scanner duplex path 08-004
4-130Original paper jam while reversing paper in scanner 08-003
4-129Original paper jam inside of scanner08-002
4-128Original paper does not feed in scanner 08-001
4-128Original paper jam in front of scanner 08-000
4-117Staple cartridge is empty. Replace it07-015
4-126Finisher error: #07-014. Please turn off then on07-014
4-125Finisher error: #07-013. Please turn off then on07-013
4-124Finisher error: #07-012. Please turn off then on07-012
4-123Finisher error: #07-011. Please turn off then on07-011
4-122Finisher error: #07-010. Please turn off then on07-010
Troubleshooting
Page
Error Message Error Code

Table of Contents

Related product manuals