Samsung CLX-9250ND - Page 129

3. Replaceme
n
3. Replacement proc
e
This chapter includes procedures for replacing servic
e
3.1 General Disassembly P
r
When you disassemble and reassemble components
The close proximity of cables to moving parts makes
p
components make sure that any cables disturbed by t
components
,
make
sure
that
any
cables
disturbed
by
t
their original positions. Before removing any compon
e
surrounding part configurations.
Whenever servicing the machine, you must perfor
1.
Check to verify that documents are not stored in m
1.
Check
to
verify
that
documents
are
not
stored
in
m
2. Be sure to remove the toner cartridge before you
d
3. Unplug the power cord.
4. Use a flat and clean surface.
5. Replace only with authorized components.
6. Do not force plastic-material components.
7. Make sure all components are in their proper posi
Service Manual
CLX-9250/9350 series
3-
n
t Procedures
e
dures
e
able parts on the printer.
r
ocedure Precautions
in the printer, you must use extreme caution.
p
roper routing very important. When you remove
the procedure are restored as close as possible to
the
procedure
are
restored
as
close
as
possible
to
e
nt from the machine, note the cable routing and
m the following:
memory.
memory.
d
isassemble parts.
tion.
SAMSUNG ELECTRONICS
1