Samsung CLX-9250ND - Left Cover

3. Replaceme
n
CAUTION
When assembling the Inner Cover the harness can b
e
3.2.3 Left cover
Perform the following procedure to remove the Left C
o
1. Remove Plate-Shield [A] after removing 1 screw.
2. Remove the ozone filter [B].
3. Remove the dust filter cover [C].
[C]
[A]
[B]
Service Manual
CLX-9250/9350 series
3-
n
t Procedures
e
damaged! Please pay attention.
o
ver.
4. Remove the left upper cover [D] after removing
6 screws.
5. Remove the left lower cover [E] after removing
4 screws.
[D]
[E]
[E]
SAMSUNG ELECTRONICS
7