Samsung CLX-9250ND - Page 16

1. Prec
a
1.2.5 Disregarding this warning may
(1) Be careful with high temperature components.
The fuser unit works at a high temperature. Use ca
u
cool down before disassembly.
(2) Do not put fingers or hair into the rotating parts.
When operating a printer, keep your hands and hai
r
motor, fan, etc.).
(3) When moving the printer :
- When transporting/installing the equipment, employ f
o
- Be sure not to hold the movable parts or units (e.g. th
equipment.
- Be sure to use a dedicated outlet with 110V/220V po
w
- The equipment must be grounded for safety.
- Select a suitable place for installation. Avoid excessi
v
sunlight.
- Provide proper ventilation since the equipment emits
- The e
q
ui
p
ment must be installed near the socket outl
qp
-Be sure to fix and plug in the power cable securely aft
e
-If you are moving the machine a short distance, you s
h
(e.g : same building through elevator)
-If you are moving the machine a long distance, you s
h
& staple unit, tape and disassemble all trays. (e.g :
m
Service Manual
CLX-9250/9350 series
1
-
a
utions
cause bodily injury
u
tion when working on the printer. Wait for the fuser to
r
away form the rotating parts (Paper feeding entrance,
o
ur people and be sure to hold the lifting handles.
e control panel, DADF) when transporting the
w
er input.
v
e heat, high humidity, dust, vibration and direct
a slight amount of ozone.
et and must be accessible.
e
r the installation so that no one trips over it.
h
ould separate the finisher.
h
ould remove toner & imaging unit, lock scan carrier
m
oved by truck or so)
SAMSUNG ELECTRONICS
-
4