Samsung CLX-9250ND - Page 164

3. Replaceme
n
3.5.5 Fuser Bias / Fuser Bias Termin
a
Perform the following procedure to remove the Fuser B
1. Remove the
g
uide du
p
lex after removin
g
6 screws.
gp g
2. Remove the Fuser bias [A] and the Fuser bias term
When removing [B], slide it to the direction of arrow
[A]
NOTE
When you are only replacing the Fuser Bias Terminal
Service Manual
CLX-9250/9350 series
3-
3
n
t Procedures
a
l
ias / Fuser Bias Terminal from the Fuser Unit.
inal [B] after removing 3 screws.
.
[B]
[B], you do not need to remove the Duplex guide.
SAMSUNG ELECTRONICS
3
6