Samsung CLX-9250ND - Page 177

3. Replaceme
n
Check the thermostat assembly status.
Ch k th NC th i t bl t t
Ch
ec
k
th
e
NC
th
erm
i
s
t
or assem
bl
y s
t
a
t
us.
Check the harness/connector assembly status.
Check
the
harness/connector
assembly
status.
CAUTION
If the connector is not connected properly, overheatin
g
Check the assembly position, connection status.
After the fuser repair, check the following.
- The fuser unit weighs about 6 kg. Be careful not to d
r
- When installing fuser unit, hold the both side handle
s
- When installing fuser unit, do not apply force.
- Check if the both handles are locked properly.
- Fix 2 screws.
Cl h id d h k if h hi i
Service Manual
CLX-9250/9350 series
-
Cl
ose t
h
e s
id
e cover an
d
c
h
ec
k
if
t
h
e mac
hi
ne
i
s op
e
3-
4
n
t Procedures
- Check if the thermostat is fixed properly.
- Check if both harness are connected properly.
CAUTION
CAUTION
If Thermostat or harness connection is not stable,
overheating/fire can occur because the overheat-
protective function can not be performed properly.
- Check if the NC thermistors are fixed properly.
- Check if the NC thermistor connectors are
connected properly.
CAUTION
If the NC thermistor connector is not connected
If
the
NC
thermistor
connector
is
not
connected
properly, overheating/fire can occur.
g
/fire can occur.
r
op it.
s
.
dl
SAMSUNG ELECTRONICS
e
rate
d
proper
l
y.
4
9