Samsung CLX-9250ND - Page 181

3. Replaceme
n
11. Release the guide tension F[G] / R[H] slightly.
CAUTION
If you remove the guide tension F/R completely, the t
e
be damaged.
[G]
12. Take off the tension roller [I].
[I]
13. Lift the cartridge transfer frame up slowly to separ
a
[J]
Service Manual
CLX-9250/9350 series
3-
5
n
t Procedures
e
nsion roller will drop down and the belt surface will
[H]
CAUTION
When removing the tension roller from the ITB unit,
be careful not to drop both bush-bearings in the
belt.
a
te the transfer belt [J].
NOTE
In case of using the ITB Frame Install JIG, install
the frame on the JIG and remove the belt to the
direction of arrow.
SAMSUNG ELECTRONICS
5
3