Samsung CLX-9250ND - Page 192

3. Replaceme
n
6. Remove 3 screws and 1 connector.
7. Release 2 harness holders.
8. Remove the DC control PBA shield [B].
[
B
9. Remove the HVPS board (front) after removing 4 sc
r
Gray
Red
CAUTION
When reassembling the connectors from top/b
o
the wire colors match the photo above.
Service Manual
CLX-9250/9350 series
3-
6
n
t Procedures
B
]
r
ews and all of the connectors.
Black
o
ttom of the Front HVPS PBA, make sure that
SAMSUNG ELECTRONICS
6
4