Samsung CLX-9250ND - Main Drive PBA

3. Replaceme
n
3.8.1 Main drive PBA
Perform the following procedure to remove the Main
D
1. Open the engine/video shield door.
2 Take off the main drive PBA after removing 5 screw
2
.
Take
off
the
main
drive
PBA
after
removing
5
screw
3 8 2 Main drive motor
3
.
8
.
2
Main
drive
motor
There are 5 identical motors in the main drive unit.
Perform the following procedure to remove the 5 Main
D
To remove a motor, remove 4 screws and 1 connecto
r
Service Manual
CLX-9250/9350 series
3-
7
n
t Procedures
D
rive PBA from the Main Drive Unit.
ws and all connectors
ws
and
all
connectors
.
CAUTION
Observe precautions
For handling
For
handling
Electrostatic
Sensitive
Devices
D
rive Motors from the Main Drive Unit.
r
.
SAMSUNG ELECTRONICS
7
2