Samsung CLX-9250ND - DADF Motor

3. Replaceme
n
3.12.3 DADF motors
Perform the following procedure to remove the 4 DAD
Service Manual
CLX-9250/9350 series
3-
9
n
t Procedures
1. Remove the DADF ri
g
ht side cover
[
D
]
.
F Motors from the DADF Unit.
g[]
(Refer to 3.12.2)
2. Remove 8 screws securing the hinge unit.
3. Take off the hinge unit after removing 2 screws.
4. Unplug all connectors on the DADF main PBA.
CAUTION
Observe precautions
For handling
Electrostatic
Electrostatic
Sensitive
Devices
SAMSUNG ELECTRONICS
9
4