Samsung CLX-9250ND - DADF Cover Open

3. Replaceme
n
3.12.4 DADF Cover Open Senso
r
1 Remove the DADF right side cover [D]
Perform the following procedure to remove the DADF
1
.
Remove
the
DADF
right
side
cover
[D]
.
(Refer to 3.12.2)
2. Remove the Linker.
Linker
3. Remove 1 screw.
4. Release the DADF Cover Open.
Service Manual
CLX-9250/9350 series
3-
9
n
t Procedures
r
5 Remove 6 screws
Cover Open Sensor from the DADF Unit.
5
.
Remove
6
screws
.
6. If the sensor is defective, replace it.
SAMSUNG ELECTRONICS
9
7